John Deere Parts and Equipment

Genuine Item

A device having a sharp edge or edges and performing the function of cutting or shearing. ** For cutterbar sections reference term code 2480-04. **

Available to Order

^£59.⁴⁴

Genuine Item

John Deere Grass Knife - HXE185150

A device having a sharp edge or edges and performing the function of cutting or shearing. ** For cutterbar sections reference term code 2480-04. **

Available to Order

^£48.⁶⁷

Genuine Item

John Deere Hexagonal Head Flanged Screw, M10 X 25 - R522679

An externally threaded fastener of one nominal diameter designed for insertion through holes in assembled parts or into tapped holes and intended to be tightened or released by torquing a nut or the screw head.

Available to Order

^£1.⁵⁴

Genuine Item

John Deere Round Hole Washer - 24M7111

A piece of metal , felt , fiber or other material usually annular and basically flat used under a bolt or rivet head under a nut or other fastener to distribute pressure , produce predetermined pressure or space. Includes parts with a thickness greater than 0.77 MM and equal to or less than 9.53 MM.

Available to Order

^£1.¹²

Genuine Item

John Deere Fillister Head Shoulder Screw, M6 X 30 - H169640

A headed externally threaded tension fastener capable of being tightened or released by turning the head and of being inserted through holes in assembling parts; or of mating with a tapped or other preformed internal thread; or of forming its own mating thread.

Available to Order

^£1.⁹⁶

Genuine Item

John Deere Hexagonal Head Screw, 3/8" X 1 1/4", 3/8" X 1-1/4" - 19H3239

An externally threaded fastener of one nominal diameter designed for insertion through holes in assembled parts or into tapped holes and intended to be tightened or released by torquing a nut or the screw head.

Available to Order

^£2.²⁹

Genuine Item

John Deere Cotter Pin - 11M7040

A double bodied fastener manufactured from half round wire having a loop at one end which forms the head. The opposite end is secured by bending a portion of the length.

Available to Order

^£0.⁷⁶

Genuine Item

John Deere Cotter Pin - 11M7023

A double bodied fastener manufactured from half round wire having a loop at one end which forms the head. The opposite end is secured by bending a portion of the length.

In Stock

^£0.⁴³

Genuine Item

John Deere Clamp - L157513

Devices which hold parts in fixed positions. Includes tube and wire clamps. ** For hose clamps use 1766-06. **

Available to Order

^£4.⁷⁵

Genuine Item

John Deere Round Cross Section O-Ring - DZ114164

A circular or quad-ring cross-section flexible ring of elastomeric material which is usually used for reciprocating or static seal applications.

Available to Order

^£21.³⁸

Genuine Item

John Deere Engine Oil Filter Element with O-Ring - RE509672

The porous component or media that fits inside a filter housing. **Remanufactured Filter Element use code 321276

Available to Order

^£42.³¹

Genuine Item

John Deere Countersunk Head Screw, M6 X 12.7 - H228135

A headed externally threaded tension fastener capable of being tightened or released by turning the head and of being inserted through holes in assembling parts; or of mating with a tapped or other preformed internal thread; or of forming its own mating thread.

Available to Order

^£1.⁴⁸

Genuine Item

John Deere Connecting Rod Screw, M12 X 61 - R501124

A headed externally threaded tension fastener capable of being tightened or released by turning the head and of being inserted through holes in assembling parts; or of mating with a tapped or other preformed internal thread; or of forming its own mating thread.

Available to Order

^£12.⁶⁶

Genuine Item

John Deere 12 Volt Battery, Wet Charged, 154 Ah, 1150 CCA, A BCI - AL203839

A unit containing electrolyte that stores chemical , thermal , nuclear, solar etc. Energy and converts it into electrical energy.

Available to Order

^£252.⁰⁰

Genuine Item

John Deere Bulb, 12 Volts, 5 Watts - MCXFA1009

A rounded glass envelope which encloses the light source in a lamp.

Available to Order

^£1.⁷³

Genuine Item

John Deere Spring Locking Pin - H169913

A two-pronged , u-shaped fastener manufactured from round steel wire. This type of fastener is preferably used as a retaining pin which may be removed and reinserted by hand i.e. Without any tools. Refer to DPR 5580-06.

Available to Order

^£2.⁶⁴

Genuine Item

John Deere Dome Head Blind Rivet - L100741

Usually a headed device used for uniting two or more parts by an applied force which generally deforms the plain end of the rivet.

Available to Order

^£1.⁸²

Genuine Item

John Deere Turbo Foot Stud, M10 X 59 - R543352

A threaded part less than or equal to 6.00 Inches (152.4 mm) in length. It may be threaded on either one or both ends or throughout its entire length. Threads on the two ends may be different. **Threaded parts longer than 6.00 Inches (152.4 mm) are coded 6579-01 (Rod).**

Available to Order

^£28.²⁰

Genuine Item

John Deere Hexagonal Lock Nut, M6 - 14M7528

An internally threaded fastener which is secured in a fixed position by mechanical deformation. Includes self-locking nuts.

Available to Order

^£0.⁷⁶

Genuine Item

John Deere Valve Stem Seal - RE31617

Special devices primarily used on shafts to prevent the passage or return of fluids or foreign matter.

Available to Order

^£7.⁸¹

Genuine Item

John Deere Belt Pickup Platform Plastic Finger - H86248

A projection extending from a basic part or parts. Used to assist in moving and packing materials such as the augerfingers on a cutting platform. Coiled spring-type fingers are coded spring tooth 7718-08.

Available to Order

^£2.⁹⁹

Genuine Item

John Deere Auger Bearing Cap Retainer - H169912

A part that keeps or locks some other part in place.

Available to Order

^£8.⁶⁴

Genuine Item

John Deere Stud with Prevailing Torque Feature, M10 X 91.5 - DZ10229

A threaded part less than or equal to 6.00 Inches (152.4 mm) in length. It may be threaded on either one or both ends or throughout its entire length. Threads on the two ends may be different. **Threaded parts longer than 6.00 Inches (152.4 mm) are coded 6579-01 (Rod).**

Available to Order

^£25.²¹